SP3012-03UTG Information

Littelfuse SPA

LED Lighting Solutions

Littelfuse is committed to supporting all facets of the LED lighting market with innovative solutions that not only meet regulatory standards but also increase equipment safety and reliability. To help protect end users, Littelfuse works closely with many LED driver IC suppliers, to ensure their evaluation boards and reference designs comply with safety and surge immunity requirements. They also assist LED lighting power supply manufacturers in designing optimal protection schemes for their driver modules. At the OEM level they cooperate with luminaire and lamp manufacturers to ensure their products are optimally designed for robust surge immunity protection.

LittelfuseSP30xx

Littelfuse TVS Diodes

Littelfuse TVS Diodes are used to protect semiconductor components from high-voltage transients. Their p-n junctions have a larger cross-sectional area than those of a normal diode, allowing them to conduct large currents to ground without sustaining damage. Littelfuse supplies TVS Diodes with peak power ratings from 200W to 30kW, and reverse standoff voltages from 5V to 600V. Littelfuse SMAJ, SMBJ, SMCJ, SMDJ, P6KE, and 1.5KE TVS devices are ideal for the protection of I/O Interfaces, Vcc bus and other vulnerable circuits used in telecom, computer, industrial, and consumer electronic applications.Learn More

General Purpose ESD Protection SPA Diodes

Littlefuse General Purpose ESD Protection SPA Diodes protect electronics from transient voltage damage. The wide selection offers diodes that meet industry requirements to solve multiple exposure issues.

Ethernet ESD, Lightning, & Power Fault Protection

Littelfuse Ethernet/PoE ESD, EFT, Lightning, and Power Fault Protection ensures that the power fault overcurrent can be protected with Telelink fuses. The Ethernet Power Fault Protection includes the SMCJ and SP40 TVS Diode, SP3, SRV05xx, LC03xx, and SP40xx Diode Array, and the 0461xxx Fuse series. Littelfuse Ethernet/PoE ESD, EFT, Lightning, and Power Fault Protection products meet various applicable standards. 

Low Capacitance ESD SPA Diodes

Littelfuse Low Capacitance ESD SPA Diodes provide protection for cables that operate with high-speed data and signals. 

Lightning Surge TVS SPA Diodes

Littelfuse Lightning Surge TVS SPA Diodes are designed to limit the amount of unwanted voltages to prevent damage by blocking the surges. 

TVS Silicon Protection Arrays (SPA)

Littelfuse TVS Diode Arrays SPA™ (Silicon Protection Arrays) are designed to protect electronics from very fast and damaging voltage transients, such as lightning and electrostatic discharge (ESD). The diodes offer an ideal protection solution for I/O interfaces and digital and analog signal lines in computer and consumer portable electronics. The TVS SPA diodes offer a broader application use and improved impulse protection performance over conventional diodes.

Industrial Communication & Control

Littelfuse Industrial Communication and Control provides protection for RS-485 and Ethernet applications. The Industrial RS-485 features the capability of driving multiple ports, a fast speed rating of 10Mbps, and a long-distance transmission of 1500. Industrial Ethernet provides a long-distance transmission of 100m, a 30W PoE+ rating, and a fast speed rating of 1Gbps. Littelfuse Industrial Communication and Control RS-485 and Ethernet devices are ideal for energy meters, factory automation, wind control, and human machine interface. 

SP3012 TVS Diode Arrays

Littelfuse SP3012 TVS Diode Arrays offer market leading clamping performance with a very low dynamic resistance of 0.4Ω to provide superior ESD protection for high-speed ports, such as HDMI1.3/1.4, USB2.0, USB3.0, eSATA, and Ethernet. SP3012 integrates 6 channels of ultra-low capacitance rail-to-rail diodes and an additional zener diode in a small form µDFN package (3.5x 1.35 x 0.5mm). The optimized μDFN-14 package enables straight-through routing to simplify PCB designs. This robust device can safely absorb repetitive ESD strikes at ±12kV (contact discharge), 25kV (air discharge) per IEC61000-4-2 and above the maximum level specified in the IEC61000-4-2 international standard (±8kV contact discharge) without performance degradation. SP3012's extremely low load capacitance of only 0.5pF (per I/O to GND) minimizes signal degradation and distortion to protect high-speed signal pins. Designed to protect sensitive chipsets on high-speed data lines from any external ESD event, SP3012 TVS Diode Arrays are ideally suited for LCD/PDP TVs, DVD/Blu-ray Players, desktops, MP3/PMP, set top boxes, smartphones, ultrabook/notebooks, and digital cameras.

Littelfuse High Reliability TVS Diodes

SP3012 TVS Diode Array SPA™ for ESD

The Littelfuse SP3012 Series integrates either 4 or 6 channels of ultra-low capacitance rail-to-rail diodes and an additional zener diode to provide protection for electronic equipment that may experience destructive electrostatic discharges (ESD). These robust devices can safely absorb repetitive ESD strikes above the maximum level specified in the IEC61000-4-2 international standard (±8kV contact discharge) without performance degradation. The extremely low loading capacitance also makes it ideal for protecting high speed signal lines such as USB3.0, HDMI, USB2.0, and eSATA.

Automotive Qualified SPA TVS Diodes

Littlefuse Automotive Qualified SPA TVS Diodes are PPAP (production part approval process) capable with a single origin flow from wafer creation and testing to tape and reel. The AEC-Q101 qualified diodes offer durable protection for current and emerging automotive technologies.

Specifications

SP3012-03UTG Price & Stock

Littelfuse SP3012-03UTG pricing and available inventory.

AD5242BRUZ1M distributor

Alternate Names

Littelfuse has several brands around the world that may have alternate names for SP3012-03UTG due to regional differences or acquisition. SP3012-03UTG may also be known as the following names: